|
ARII 1/20000 Macross Quiltra-Queleual
KIT# AR-332-300
(Could not find Company Link)
Instructions and Reference Pictures are available
Never really planed to buy this model, saw it on E-bay with a no bid, so I bid a dollar. Forgot about it till the day I got the E-mail saying I won it. Paid 4 dollars for it and that includes shipping. Not bad at all. I have found almost no reference pictures on the net, or reviews of this model as well. This is my spare time model. When I get 5-10 minutes and want to work on a model but not get involved doing a lotdetail I just grab this and go. Hopefully I will finish it up soon.
Open Box Review
Looks to be a simple model just a few pieces. Panel lines are deep so should be simple to detail. Looks like a good cheap model. It comes with and SDF1 on was well for size comparison.
| Spure Shots |
Not Avaible. If I can find some on the net I will post them |
Planning
The only plan I had for this model was to work on seam lines. This was the first model where I had a smooth surface, and where I wanted to see if I could smooth out the seam lines where they could not be seen.
Paints and Tools used so far. |
| Paints: |
Spray Paint
Kryon Sandable Prime
Hand Brushed
Vallejo
Additives:
Flow Aid |
| Tools: |
Excato Knife
Files
Squdron Green Putt
Sand Paper |
Things I have learned from this kit so far.
Doting all the Panel lines and rivets will make you go cross eyed.
| Work In progress Shots |
|
I have done the base paint coat on the model and added a bit of detail (the Red). I will clear coat it now and do the panel lines. The model was very easy to build other than the “antenna” They were a pain to get them to stay in the correct position. The bulge at the bottom of the model is some sticky tack that use to cover the hole for mounting. It is easier than sanding out hole to remove excess paint. |
 |
 |
 |
 |
 |
 |
Contact me at josborn@happinessismandatory.com
|
